Oblivion Modular Camera Mount
Description
PDFTop mount for the TBS oblivion pod so you don't need to use the dumb gopro strap.
Can also be used to hold fins or other accessories.
Works with both the standard pod and the GoPro style pod.
People have reported better luck printing the base plate (dovetail) in TPU instead of PLA
Standard Pod
Print the 'curve-adapter' in TPU to act as a shim on the curved surface
Print the 'dovetail'
Drill / Melt 2 holes into the pod to keep part attached (use any m3 screw)
GoPro Pod
No need for the 'curve-adapter'
Drill / Melt 1 hole in the top of the pod (use any m3 screw)
STL files are provided if you want to make your own designs compatible with the rail system.
Open Source: Fusion 360 original files available here https://a360.co/2mh3bVF
The dimensions of the rails are 3.5mm holes, spaces 6mm apart with a total interior width of 6mm
Total weight of rail (including the fin) is 3 grams.
Category: R/C VehiclesTags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.
