Lens Caps (one part print)

I needed a lens cap for my Raynox-250 macro lens to go with the rear cover I designed earlier. After some modifications to make it easier to adjust dimensions I've uploaded more cap sizes.

Print without support. After print, place the cap with button towards a hard surface and push firmly until it snaps loose. Do the same for the other side. There's only a 0.3mm gap in the design so it will probably stick together somewhat. I've printed in 0.15mm PLA and PETG.

As always, if you find it useful a tiny donation goes a long way to show appreciation. :)

NOTE: This lens-cap uses the same spring mechanism as GlOwl but is otherwise designed from scratch: https://www.thingiverse.com/thing:3241700

If you like my designs please consider donating a coffee or any amount really, I really appreciate the gesture.

https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6