Fast Overhang Test

Designed to be printed fast, with low consumption of material. Tests angles from 25° to 85°.

Why this shape?

At first I made a plain 2 mm thick arc-shaped stripe, with the numbers embossed on the top. However, that model was bending upwards during the print, due to the printed layers cooling down, so the model was pressing against the print head, causing some secondary issues with the overhangs.

Finally I came up with this half-bridge-shape, that ensures the model rigidity throughout the print.

Update 2018-12-09 - v4

• Even lower material consumption - only 1.2 m of filament
• Even faster print times
• 40 mm tall

• Does not bend due to temperature change #### Print settings

• 0% infill *Disable "Ensure vertical shell thickness"!

• 2 perimeters #### Print times on Prusa MK3 with Slic3r 1.41.2

• 0.20 mm - 30 min

• 0.15 mm - 39 min
• 0.10 mm - 56 min
• 0.05 mm - 2 h 4 min

  Print Settings

Infill:

0%

Notes:

• Disable "Ensure vertical shell thickness"
2 perimeters 3mm brim is recommended to ensure better grip