Ultimate Printrbot Simple Metal Enclosure

Complete enclosure solution for Printrbot Simple Metal with spool holder, power supply, raspberry pi mount, control panel, drawer, filament guide.

Instructions

Cut from 1/4" MDF and acrylic. All the nuts and bolts are M3 25mm with a handful of M3 12mm. Also it uses the 16mm switch for the power supply and can hold either the V1 or V2 control panel. You can mount your ATX power supply inside the case and there is a 3d printable drawer, hinges and panel holders. I also included a filament guide that could have a filament cleaner attached. The lip on the top is thick enough to attach some LED strip lighting and you can mount a raspberry pie inside for remote printing if you like. If you use a V2 control panel you will have access to the SD card slot on the side of the case. If you have a V1 control panel you can access the SD card slot by sliding the bed all the way to the left.

If you don't have access to a laser cutter let me know and we can work something out.