K8200/3Drag GT2 X Belt Mount with easy Tension - Upgrade

This simple construction are for upgrading your K8200/3Drag to GT2 belt on X axis.
It is a direct replacement, reusing the original mount screw and holes, adding the missing belt tension.

For complete upgrade of X axis to GT2, you need:

• GT2 6mm belt (mine is from eBay)
• GT2 pulley for motor (20 teeth and 5mm motor hole)
• The printed parts (2x wedge + mount left + mount right + clamp)
• Two M3x30mm screws

Two M3 nuts Assembly as shown on pictures.

>> If you like it, please leave a like, rating or a tip... :)

Print Settings

• 0.20mm layer height, 15% infill
• 2 perimeters, 3 top and 2 bottom layers
• No support needed