CR-10s Bed Spring Spacer - Parametric Fusion 360

This was used to raise the bed by adding this below the spring. I was having problems with the z-stop being almost to the extent of the bed springs, causing frequent problems and adjustments.
This was designed in Fusion 360. That file is included. Parameters were used for all values: screw (bolt) hole, spring diameter, Offset Height (amount you want bed raised), CupHeight (added after offset), and wall thickness.
Feel free to use as is or change parameters as needed for your application. This should work for any printer with similar springs in the bed.

Print Settings

Printer Brand:

Creality

Printer:

CR-10S

Doesn't Matter

Supports:

No

0.2

Infill:

20%

Any Any, I used PLA+ ](http://www.amazon.com/s?url=search-alias&field-keywords=Any+Any%2C+I+used+PLA%2B&tag=thingiverse09-20) Any How I Designed This

Fusion 360

Fusion 360 file is included.
Text was added to the bottom just as a reminder of the current offset. If you change the Offset dimensions you may want to edit the text to the given amount of your offset.