Alt. Base for E14 Socket

This is a Base for the Greek Meander Lamp to use with a ordinary lightbulb with E14 socket.

You will also need:

Switch:

Black:
https://www.amazon.de/gp/product/B06Y1RDBZ7/ref=ppx\_yo\_dt\_b\_asin\_title\_o06\_s00?ie=UTF8&psc=1

White:
https://www.amazon.de/Einbauschalter-rechteckig-wei%C3%9F-f%C3%BCr-Tischleuchten/dp/B005JBIOOY/ref=pd\_aw\_sbs\_60\_1/261-3369899-6566561?\_encoding=UTF8&pd\_rd\_i=B005JBIOOY&pd\_rd\_r=2a6f0373-2e82-4aed-8fae-f9e4738da855&pd\_rd\_w=o5cUo&pd\_rd\_wg=9TqqF&pf\_rd\_p=ecf0cb80-06b1-4598-85b1-6d77c4f95871&pf\_rd\_r=DV4PZRS3EJ4NCDP5KY6V&psc=1&refRID=DV4PZRS3EJ4NCDP5KY6V

Kable:
Black/white:
https://www.amazon.de/Meister-Euro-Zuleitung-H03VVH2-F-wei%C3%9F-7442010/dp/B01NAXH4ZY/ref=sr\_1\_32?\_\_mk\_de\_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=kabel%2B230v%2Bstecker&qid=1577722303&sr=8-32&th=1

Socket:

Here you can buy 10 of them so i strongly suggest to get one in your local hardware store.

Black/white:
https://www.amazon.de/Baufassung-Lampenfassung-Renovierfassung-Baustellenfassung-Phasenpr%C3%BCfer/dp/B07656NWT8/ref=asc\_df\_B07655W74J/?tag=&linkCode=df0&hvadid=309953256653&hvpos=1o3&hvnetw=g&hvrand=9243874824800177383&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9041908&hvtargid=pla-699091793960&th=1&ref=&adgrpid=62379242155

Youll need to deattach the endcap to make it fit.

Screws:
Six Countersunk Srcews. I used 2,5x10mm but + - these dimensions will do.

Hardware store for singles.

100 Pieces here:
https://www.amazon.de/MINI-Spanplattenschrauben-Senkkopf-PZ-Kreuzschlitz-Modellbau-Restauration/dp/B07DN8LDYV/ref=sr\_1\_6?\_\_mk\_de\_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=2%2C5x10mm&qid=1580938476&s=diy&sr=1-6

Optional M10 Nuts:

Four pieces, just for giving the lamp a bit of weight.

Cheapest Nuts will do the trick. You can pick single ones in you hardware store.

OR: https://www.amazon.de/St%C3%BCck-Sechskantmuttern-Edelstahl-Muttern-Mutter/dp/B007QLWOK0/ref=sr\_1\_12?\_\_mk\_de\_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=1BPXK5OK7OEVK&keywords=m10+mutter&qid=1580937205&s=diy&sprefix=M10%2Cdiy%2C185&sr=1-12

Print Settings

Supports:

Yes

Filament: GIANTARM PLA, Feet: TPU maybe?

Notes:

No supports unless the one on the coat youll see on the picture.
Be sure to print the coat upside down.