GRAVITRAX height stone H=145mm with pass through

GRAVITRAX; always short of height stones? Not anymore, just print your own!

GRAVITRAX height stone (column) H=145mm with pass through (v.20211110.r04)

This one is 145 mm height; compatible with 2pc Gravitrax, Pro Vertical (2*70mm) and 5 mm Base Plate height. It has a slot through which rails can go through the column.

Print includes two parts: Column and Footplate; Footplate clicks around the bottom of the Column. You do need some force to click it in, that is intended that way (use other height stone to tap footplate in place). Tested, fitted and used with my own Gravitrax sets

note: Yes, I am trying to push the limits of this 3Dprinter with thin high elements; and I am not disappointed, slowly get the fun back in 3D printing with the Prusa MK3/S/S+

More to come, if you like it and you are rich enough then Paypal Me, else just enjoy!

G-code details:

• Printer: Prusa MK3/S/S+
• Material: PLA (1.75mm); 37 gr.; 12.56 m
• Print settings:
  • Nozzle 0.4 mm
  • Extruder 210 C°
  • Heated bed 60 C°
  • Layer 0.15 mm
  • Infill: Grid 20%
  • Adhesion: Skirt
• Print time (est.): 5 hr. 10 min.
• Software: Cura v.4.12.0
• Stl file: exported from dwg