GRAVITRAX 8 pieces! height stone 70mm with pass through (where prusa makers dare!)

GRAVITRAX; always short of height stones? Not anymore, just print your own!

GRAVITRAX height stone (column) H=70mm with pass through 8 pc. (v.20211110.r04); 8 pc. in one go of the 70 mm height column; compatible with Gravitrax, Pro Vertical. They have a slot through which rails can go through the column.

Print includes 16 parts: Columns and Footplates; Footplates clicks around the bottom of the Columns. You do need some force to click it in, that is intended that way (use other height stone to tap footplate in place, I even hammered it using another column). Tested, fitted and used with my own Gravitrax sets

Yes, I am trying to push the limits of this 3Dprinter with a massive over 24 hr print. Here I even triggered an “out of filament”/”filament failure”, as I thought it would run out overnight I decided to cut the filament to see what happened, put the new role of filament, worked flawless. I am not disappointed, slowly get the fun back in 3D printing with the Prusa MK3/S/S+ Given my bad experience with other brand printers before I am asking myself:

HOW GOOD IS THIS PRUSA PRINTER?

>>>> WELL AT THE MOMENT >>>> MORE THE EXCELLENT !!

More to come, if you like it and you are rich enough then Paypal Me, else just enjoy!

G-code details:

• Printer: Prusa MK3/S/S+
• Material: PLA (1.75mm); 212 gr.; 71.09 m
• Print settings:
  • Nozzle 0.4 mm
  • Extruder 210 C°
  • Heated bed 60 C°
  • Layer 0.15 mm
  • Infill: Grid 20%
  • Adhesion: Skirt
• Print time (est.): 24 hr. 47 min. (actual: 24 hr. 27 min)
• Software: Cura v.4.12.0
• Stl file: exported from dwg