Aomway Commander Battery Adapter Case with Goggle/Belt Clip

Aomway Commander Goggles battery adapter case with both an optional goggle clip or belt clip. You will need M2 fixing hardware, M2 x 16mm if you are using either of the clips or M2 x 12mm if you just want the case. M2 nuts are required for retension, these are tricky to insert - you may wish to use your soldering iron.

If you like this design I would appreciate makes or constructive feedback or if you wanted to leave that a tip that would be greatly appreciated.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

No

Supports:

No

0.1

Infill:

25-100

Notes:

Put the case, top and goggle clip flat on the bed when you print them, print the belt clip standing up on the top of the clip.