FGC-6 S AF H 370mm 400mm outer barrel set

as part of the big V24 update. the 14mmccw barrels have been made a bit stronger

-

• 14mm CWW barrel tips have been added ---

this is a 370mm or 400mm (one piece) long barrel replica made for the XL shrouds. and works for the MKI and MKII.

these are the 2023 versions of the Outer barels for the FGC6 MKI/MKII (s, FA, H) platform. this barrel will have a tighter Inner diameter size at the tip of the barrel. this will act like a inner barrel stabiliser so in other words it prevent it form moving around.

but before you select and print a outer barrel. make sure that your FGC6 is working correctly. and take a close look at the barrel adapter that you use.

-

this outer barrel is made to work with the fallowing models:
for the FGC-6 MKI
FGC-9 MKI UNW 14inch LB 2 piece
https://www.printables.com/model/87790-fgc-9-unw-14inch-lb-2-piece

FGC-9 MKI UNW 14inch Long barrel 2020 shroud set
https://www.printables.com/model/87795-fgc-9-unw-14inch-long-barrel-2020-shroud-set

FGC-9 MKI UNW 14inch Long barrel M shroud set

FGC-9 MKIUNW 14inch Long barrel 2021 shroud set
https://www.printables.com/model/87796-fgc-9-unw-14inch-long-barrel-2021-shroud-set

for the FGC-6 MKII
FGC9-MKIISD UNW370 shroud or for the FGC6 MKII
https://www.printables.com/model/259144-fgc9-mkiisd-unw370-shroud-or-for-the-fgc6-mkii

FGC9-MKIISD XM8 XL SHROUD set
https://www.printables.com/model/88658-fgc9-mkiisd-xm8-xl-shroud-set

FGC9-MKIISD LB XL SHROUD set
https://www.printables.com/model/88688-fgc9-mkiisd-lb-xl-shroud-set

FGC9-MKIISD TEC9 XL SHROUD set
https://www.printables.com/model/88696-fgc9-mkiisd-tec9-xl-shroud-set

-

the file naming works as fallows: 
227 slim barrel 00mm 9 18mmID
(227 slim = shroud model) (barrel = what type of barrel) (00mm = inner barrel hight) (9 18mmID = inner barrel OD size)

-

the video about it can be found here.
https://odysee.com/@UntangleWORKS:a/FGC6FA-outerbarrel:f

-

materials needed:
shroud
4x M3 washer
4x bolt m3 35mm or 40mm long

-

print settings:
0.2 layer hight should be fine.
you can use the 8 layer walls and a 40% infill.
but personally I moved a bit over to solid prints just to give it more strength in case things go wrong on the field…