FGC-6 S AF H MKI / MKII basic outer barrel and suppressor set

as part of the big V24 update. the 14mmccw barrels have been made a bit stronger

and partisan 6 barrels have been added

-

• 14mm CWW barrel tips have been added ---

these are the 2023 versions of the Outer barels for the FGC6 MKI/MKII (s, FA, H) platform. this barrel will have a tighter Inner diameter size at the tip of the barrel. this will act like a inner barrel stabiliser so in other words it prevent it form moving around.

but before you select and print a outer barrel. make sure that your FGC6 is working correctly. and take a close look at the barrel adapter that you use.

the file naming works as fallows: 
227 slim barrel 00mm 9 18mmID
(227 slim = shroud model) (barrel = what type of barrel) (00mm = inner barrel hight) (9 18mmID = inner barrel OD size)

-

for the suppressor model there are a view notes with that since it got a limited shroud option. it will basically only work on small barrel retainers like the stock MKII model. others are getting to long.

FGC6 suppressor (inner barrel 249mm max) 
for:
MKI UNW shroud 
MKII UNW short, 
MKII UNW TEC9 SHORT
original MKII barrel retainer

-
the video about it can be found here.
https://odysee.com/@UntangleWORKS:a/FGC6FA-outerbarrel:f
https://youtu.be/0dA8RhMdQiI

-

materials needed:
shroud
4x M3 washer
4x bolt m3 35mm or 40mm long

suppressor 
2x bolt m2,5 18mm or 20mm long

-

print settings:
0.2 layer hight should be fine.
you can use the 8 layer walls and a 40% infill.
but personally I moved a bit over to solid prints just to give it more strength in case things go wrong on the field…