MCS DMAG Helix to cyclone Magazine UP Adapter

keep in mind you need a plug to close off the air supply form your cyclone feed. otherwise you will have a air leak.

and of course you still need a spring and 1 pin to complete the mag release

note: these have been tested on X7 classic and X7 phenom bodies.

if you like to be the cover photo of this one. then you can send a picture of your marker with the adapter to me thanks.

itchute movie link: https://www.bitchute.com/video/NZlRmetBmjad/
https://www.youtube.com/watch?v=tkegaAAC0ws
link to the Installation video of the Dmag magfed adapter

DMAG Bren LMG
https://www.thingiverse.com/thing:3937441
DMAG FG 42, P90 (Right)
https://www.thingiverse.com/thing:3937500
DMAG P90 (centered)
https://www.thingiverse.com/thing:3937473
DMAG FG 42, P90 (Right)
https://www.thingiverse.com/thing:3937457
DMAG Tall High
https://www.thingiverse.com/thing:3937511
DMAG Tall Low
https://www.thingiverse.com/thing:3937523
DMAG TIP98 normal
https://www.thingiverse.com/thing:4115746
DMAG TIP98 side
https://www.thingiverse.com/thing:4188333
DMAG TIP98 down
https://www.thingiverse.com/thing:4190624
DMAG cyclone side
https://www.thingiverse.com/thing:4227717
DMAG cyclone up
https://www.thingiverse.com/thing:4227722
DMAG cyclone down
https://www.thingiverse.com/thing:4227712
TMC Bren LMG
https://www.thingiverse.com/thing:3790969
TMC FG 42, P90 (Left)
https://www.thingiverse.com/thing:3919897
TMC FG 42, P90 (Right)
https://www.thingiverse.com/thing:3918514
TMC P90 (centered)
https://www.thingiverse.com/thing:3925118
TMC Tall high
https://www.thingiverse.com/thing:3925141
TMC Tall Low
https://www.thingiverse.com/thing:3925181
TMC TIP98 normal
https://www.thingiverse.com/thing:4112853
TMC TIP98 SIDE
https://www.thingiverse.com/thing:4188772
TMC TIP98 down
https://www.thingiverse.com/thing:4188787
TMC cyclone SIDE
https://www.thingiverse.com/thing:4224827
TMC cyclone down
https://www.thingiverse.com/thing:4226365
TMC cyclone up
https://www.thingiverse.com/thing:4226396