Back panel magnet clip for Voron Switchwire

Info

• remove rear_panel_bracket (5pcs) frist.
• 4 pairs should be enough but you can print 2 pairs more for top side.
   

Parts required

• 4x for_back_panel (minimum)
• 4x for_side_panel (minimum)
• 8x Neodymium Magnet 6mm X 3mm (minimum)
• 3M scotch flexi tape or VHB tape
• ca glue, super glue
   

Files

• CAD files (.SLDPRT) are provided if you want to custom it.
   

Print instructions

• Filament material: ABS/ ABS+
• Layer Height: 0.2
• Infill: 20%
• Supports: No