Pick A Number Fidget Spinner

Everybody seems to be designing Fidget Spinners...Here's my take...take a spin and guess the number...

A finger pad with an arrow and without an arrow are now provided.

Print Settings

Printer Brand:

Prusa

Printer:

Prusa Mk2

Rafts:

No

Supports:

No

Resolution:

100 microns

Infill:

100%

Notes:

First layer 200 microns.

Custom Section

Multi-Colored Printing

The Prusa Edition of Slic3r was used for all components.

For the spinner, the g-code from the slicer was updated using ColorPrint (http://www.prusaprinters.org/color-print) to allow filament changes at 1.6mm, 5.6mm, and 7.1mm.

For the arrow button pad, the g-code from the slicer was updated using ColorPrint (http://www.prusaprinters.org/color-print) to allow a filament change at 0.5mm.

The bearing type used is 608-RS (one shield) and measuring 22mm (diameter) x 8mm (inner diameter/axle) x 7mm (width).

The bearing balls are 8mm Chrome Steel Bearing Balls.

Category: Mechanical Toys