Customizable clothes hook [mounted-from-the-back-edition]

Intro:

These are some simple hook for your wardrobe. They are mounted from the back with M3 inserts and screws.

For customization every hanger can be “redesigned” in Prusa Slicer by removing the top and bottom solid layers and change the infill type and percentages.

Printing instructions:

• General:
  • PLA
  • 0,6 mm Nozzle
  • 0,3 mm Layer Height
• Inserts:
  • For the area around the inserts i strengthened the parts with a local infill modifier. This is especially important when you use a small number of perimeters. The modifyers are already included in the print files down below.
  • Example for infill modifier settings:
    • Infill Hook:        15%
    • Infill Mofifier:  50%
  • Mount the inserts with a normal soldering iron
• Customization:
  • customize the infill type and percentage of the parts to your desire. Feel free to post them in here.
• Open walls and Customization:
  • in Prusa Slicer go to Print Settings > Layers and Perimeters > Solid Layers and set both to 0
  • customize the infill type and percentage of the parts to your desire.

Feel free to post your custom prints in here.

Tools/Materials used:

• Fusion 360
• a good old caliper
• Filament:
  • PRUSAMENT - 1,75 mm PLA - Galaxy Black
• Soldering iron
• Inserts: M3x5,7 from the following Link

• https://www.amazon.de/gp/product/B08BCRZZS3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1