Plant Pot / Planter sixSwirl

Inspired from my sixSwirl can/basket, I designed this plant pot.
https://www.prusaprinters.org/prints/75926-basketcan-sixswirl

It's open at the bottom to get air into the substrate and water with sewage out. the inside with its shape I hope navigates the roots always back to the inner so they get longer and don't grow around the plant pot. I always make some stones or "ceramis" in the pot the first 1 to 2cm and then soil.

It's easy scalable and you even can cut the height. There is also a full-body file if someone want to make a closed one with own wall size.

I printed mine in 0.3mm layer height, because I printed in ABS I also print with raft. The blue one is 120% and I think the orange was 110%.

Print Settings

Layer-height: 0.20mm

Rafts: Yes

Supports: No

Infill:  15 - 20%

Example Filament: Fiberlogy ABS Blue-Transparent