PRUSA SERVICE PARTS BOX

If you have print my Toolbox and want a matching Service Box. I have made 1 model with handle and 1 without. I have also made a Drill Template if you have the Toolbox and want handle to that as well. It should not be a problem to drill afterwards if you printed with 4 perimeters. It is the same size and model as the Toolbox so you can use that insertion and i have added STEP for both floors so you can custom made them as you want.

Note: When I assemble the text I use a support from below and hit the text with a hammer and a piece of POM so the plastic is not get damaged.

Printed with Verbatim Black and Red PETG 4 perimeter 0,30mm on the box and 0,15mm on the handle. You need 4pcs of M4x20mm with Countersunk head and 10pcs M3x20mm for the hinge and lock.

2022-11-18 Added a clean top without text by request.

Hope you like it.