Raspberry Pi4 Case for Prusa MK3/S/+

Remixed from WDR's model with the following changes:

• M2.5 screws to mount the Pi in the case so as to not have to enlarge the holes in the Pi.
• Removed extra space for the Pimoroni Fam Shim
• Made a version with the Pi-cam breakaway already removed so I didn't have to cut it out

Put a Raspberry Pi4 on your Prusa MK3/S/+ and have it align perfectly with the frame.

• Smallest form factor possible for a Pi4.
• All peripheral ports accessible (not the Pi headers).
• Break away window for Pi-cam - version with breakaway removed.
• Windows for status lights.
• Slim attachment block to frame.
• Uses styling cues from the Einsy Case with chamfered corners and textured sides
• Easy to print: no supports needed.

Uses:

• 4 - M2.5x16 for the case
• 2 - M3x10 for attaching to printer

Print Instructions

I printed with the following:

•  .3mm layer height
• 15% Infill
• PETG
• Support on build plate only (although supports aren't needed, but it's easier/faster to poke out the supports in the screw hole than cleaning it up)
• Complete individual objects

Other settings like .2mm layer height and no supports should work just fine as well.