Somfy Tahoma Box Wall Support

Wall support for somfy tahoma box.
It needs 2 (small) holes in the wall with 93mm distance between the origin of the holes.
I printed in PETG (because I had it of white color) but you can print also with PLA.
I suggest to print it so that the holes are vertical on the print bed.
No supports needed.
I've used 0.15mm quality, with Variable layer height: lower in the bottome and haigher in the top, but I'm sure that also 0.2mm will work.
The front edge of the support (where tahoma is placed) is diagonal to avoid supports.