LCD + 4" Non-HyperPixel Touchscreen Cover

The model from Puckpuck is awesome but I needed a little more room to allow space for the little U-shaped jumper that connects the HDMI port from the touch screen to the Raspberry PI 4 I was using.

Because of the increased size of the screen and the repositioning of the PI the entire cover length was increased by 10mm. I ended up having to cut the model in half to be able to print on my Prusa MK3s. I made some 1.75mm holes where you glue together the two side to make lining up easier.

Parts list:

Screen - I had a hard time finding a HyperPixel so I opted for this cheaper version

https://www.amazon.com/gp/product/B08M62BBBL/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

PI 4 - Probably could get away with a PI 3 but I wanted to try out a 4 😃 

https://www.amazon.com/gp/product/B07TC2BK1X

Power adapter with switch - After a lot of searching for a nice 90-degree wire to connect with a buck converter, I opted for a switched wire. It is honestly really nice and pretty cleanly hidden.

https://www.amazon.com/gp/product/B08C9VYLLK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1