📢 Beware of SCAM! If you get a suspicious Messenger message with a link, don’t open it or reply!
3D Models 3D PrintersOther Printer Parts & Upgrades

Adhesive Raspberry Pi Camera v2.1 mount (OpenSCAD)

0 reviews
Adhesive Raspberry Pi Camera v2.1 mount (OpenSCAD) Author: Brian Khuu (2019) This is a pressfit design.
0
23
0
314
updated February 20, 2022

Description

PDF

Adhesive Raspberry Pi Camera v2.1 mount (OpenSCAD)
Author: Brian Khuu (2019)

This is a pressfit design. No support required. Just print and push the camera PCB to the mounting holes.

Apply adhesive strip

Default value assumes: Command Strip dimentions is typically 50mmx15mm

https://www.thingiverse.com/thing:3695202

Print instructions

Unassociated tags: 3d printer

Category: Electronics Summary

Adhesive Raspberry Pi Camera v2.1 mount (OpenSCAD)
Author: Brian Khuu (2019)

This is a pressfit design. No support required. Just print and push the camera PCB to the mounting holes.

Apply adhesive strip

Default value assumes: Command Strip dimentions is typically 50mmx15mm

https://www.thingiverse.com/thing:3695202

Tags

3dprinterparts thingiverse raspberrypicamera

Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License